Whatman Puradisc Nylon Syringe Filters, 0.1 µm, 13 mm, 100/Pk - 6789-1301
Whatman maintains in-house specialists who set and verify material specifications separately for its cellulose, glass-fiber, and polymer membrane chemistries, tailoring quality control to how each one behaves in use. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The nylon matrix resists particle shedding through extended filtration cycles while supporting high-volume routine filtration and tolerates alcohols and aliphatic and aromatic solvents. Low-extractable polypropylene keeps sample purity intact through the filtration pass while resisting degradation from routine sample matrices and holds its geometry through sample filtration at temperatures up to 121°C. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Polar amide backbone gives high native affinity for nucleic acids
- Low extractable contribution to sensitive analytical preparations
- Absolute pore size rating holds consistent across every protocol
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
- Non-fibrous membrane structure resists media shedding into the filtrate
Housing Characteristics
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Stable across the full aqueous pH range in routine sample work
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- <25µl
- Material
- Nylon
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 100
- Pore Size (µm)
- 0.1
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophilic
- Dissolution Testing - Supports accurate drug release profiles by clarifying dissolution samples ahead of HPLC quantitation in QC labs.
- Ink and Dye Filtration - Filters aqueous and solvent-based inks and dyes, removing pigment agglomerates ahead of color strength analysis.
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.
- Small-Volume Sterile Prep - Cold-sterilizes small-volume aqueous reagents within a compact blister-pack format for safe, convenient benchtop use.