Whatman Puradisc Polypropylene (PP) Syringe Filters, 0.45 µm, 25 mm, 1000/Pk - 6790-2504
Whatman standardizes its manufacturing platform to the point that consistency and thorough lot-level records come as a default, exactly what analytical laboratory work demands. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. The polypropylene matrix delivers nominal retention with high dirt-loading capacity and tolerates solvents and acids that degrade many membranes. The PP housing sustains efficient flow on viscous samples while shedding virtually no extractable material into the sample and stays inert across common laboratory solvents. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Metal-ion leaching resistance holds during acid-digested sample filtration
- Withstands fluids across the full pH range from 1 to 14
- Captures coarse particles near the surface and fine particles deeper within
- Saturated hydrocarbon backbone resists the hydrolytic degradation common in ester-linked filter media
- Solvent-stable polypropylene handles aliphatic hydrocarbons and common process oils
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Minimal extractable release from the housing supports sensitive analytical work downstream
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request Whatman's lot documentation and performance history to support your protocol validation.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- (Hydrophobic)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Polypropylene Depth Filter (DpPP)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Hexane Extract Filtration - Handles non-polar hexane extracts from food, environmental, and pharmaceutical matrices without swelling or extractables.
- Industrial Solvent Monitoring - Clarifies organic solvent process streams and used-solvent recovery batches for quality and contamination analysis.
- Paint and Coatings Analysis - Filters solvent-borne paint and resin solutions for HPLC and GC compositional and additive content measurement.
- Biopharma Prefiltration - Removes large particulates from fermentation and upstream bioprocess streams ahead of membrane filtration steps.
- DMF Sample Filtration - Handles N,N-dimethylformamide polymer and pharmaceutical solutions with full chemical resistance for routine analytical prep.
- Flavor and Fragrance Prep - Handles alcohol-based flavor and fragrance concentrate preparations before GC-MS aroma compound profiling.