Whatman Puradisc PVDF Syringe Filters, 0.2 µm, 13 mm, 500/Pk - 6792-1302
Whatman maintains in-house specialists who set and verify material specifications separately for its cellulose, glass-fiber, and polymer membrane chemistries, tailoring quality control to how each one behaves in use. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. The surface modification reverses PVDF's natural affinity for protein adsorption while achieving sterile-grade retention at sub-micron pore sizes and tolerates common chromatography solvents without degradation. The polypropylene housing presses snugly against the membrane during the pass and delivers a chemically clean filtrate to the downstream step. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- Filtration preserves mammalian cell viability, phenotype, and growth
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Absolute pore rating ensures reproducible results between test runs
- Limiting oxygen index runs high, supporting flame resistance and low smoke
- Protein and peptide sample loss to adsorption stays minimal
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Minimal extractable release from the housing supports sensitive analytical work downstream
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request Whatman's quality documentation to support your filtration step meeting a recognized laboratory-science standard.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.8 bar (26 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- <25µl
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 500
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophobic
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Mycotoxin Screening - Clarifies grain and food extracts ahead of HPLC analysis, supporting reliable detection of aflatoxins and other mycotoxins.
- LC-MS Sample Prep - Delivers low-extractable filtrates that prevent ion suppression, supporting clean baselines for LC-MS analysis.
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
- Pre-Blot Sample Prep - Ensures ultra-low protein binding for maximum sample recovery ahead of sensitive immunodetection protocols and assays.