Whatman Puradisc PTFE Syringe Filters, 0.1 µm, 25 mm, 1000/Pk - 6798-2501
Whatman draws on Cytiva's broader manufacturing oversight while continuing a legacy of filtration work that touches laboratory research, environmental monitoring, and industrial processing alike. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. The hydrophobic PTFE membrane provides bacterial retention in gas and vent streams while resisting attack from the harshest process chemistries and repels water while passing gases and solvents freely. The PP housing sustains full structural integrity during elevated-temperature filtration operations while keeping sample purity intact through the filtration pass and sustains efficient flow on viscous samples. No separate sterilization cycle is needed when the gas path already runs through a validated sterile-grade membrane.
Membrane Characteristics
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
- Water contact angle near 120 degrees marks strong hydrophobicity
- Stable across a wide operating temperature range for demanding methods
- Ionic and metallic extractable levels stay very low
Housing Characteristics
- Medical-grade polypropylene with broad chemical compatibility
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- PP housing rated to 121°C holds its geometry through high-temperature sample preparation and processing
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.2cm²
- Holdup Volume
- <100µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.1
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Non-Aqueous CE - Prepares non-aqueous electrophoresis samples with low background noise for clean, high-resolution separation and analysis.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.