Whatman ReZist PTFE Syringe Filters, 0.2 µm, 30 mm, 100/Pk - 10463503
Whatman's filtration expertise, refined across a century-plus of disciplined manufacturing, has made its name synonymous with laboratory-grade quality worldwide. Each hydrophobic vent-rated filter carries manufacturer bacterial retention testing built into the design, letting a vent line stay in continuous service without repeating that testing on site between uses. The hydrophobic PTFE membrane provides bacterial retention in gas and vent streams while repelling water and passing gases and solvents freely and suits solvent filtration where other membranes fail. The PP housing sustains full structural integrity during elevated-temperature filtration operations while staying inert across common laboratory solvents and delivers a chemically clean filtrate to the downstream step. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.
Membrane Characteristics
- Inert composition offers no nutrient source for microbial growth
- Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
- Validated against an aerosol Brevundimonas diminuta bacterial challenge
- Ionic and metallic extractable levels stay very low
- Absolute pore rating delivers reproducible retention across every protocol
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Medical-grade polypropylene with broad chemical compatibility
- Minimal extractable release from the housing supports sensitive analytical work downstream
- The seal formed against the membrane blocks bypass at rated operating pressure
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.0 bar (15 psi) [IPA]
- Connection Type
- Luer-Lok/ Luer Slip
- Diameter
- 30mm
- Filtration Area
- 7.07cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Pack Count
- 100
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Volume Throughput (ml)
- Up to 150ml
- Wettability
- Hydrophobic
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Venting Vessels - Vents small laboratory flasks and bottles, acting as a protective barrier that keeps out contaminants while allowing airflow.
- Extreme pH Samples - Clarifies strong acids and bases safely, relying on robust chemical compatibility to handle extreme pH levels reliably.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.