Chat with us, powered by LiveChat

Secure Checkout
ReZist Syringe Filter, 30mm, PTFE, 0.2um, 500/Pk

Thumbnail Filmstrip of ReZist Syringe Filter, 30mm, PTFE, 0.2um, 500/Pk Images

    Purchase ReZist Syringe Filter, 30mm, PTFE, 0.2um, 500/Pk

    ReZist Syringe Filter, 30mm, PTFE, 0.2um, 500/Pk
    Whatman SKU: 10463505

    $1,717.95
    Ships in 10 business days
     

    Whatman ReZist PTFE Syringe Filters, 0.2 µm, 30 mm, 500/Pk - 10463505

    Whatman has built such a strong track record in published methods that laboratories default to citing its name in standardized protocols. Each hydrophobic vent-rated filter carries manufacturer bacterial retention testing built into the design, letting a vent line stay in continuous service without repeating that testing on site between uses. Hydrophobic PTFE blocks aqueous ingress in vent and gas applications and stays chemically inert against solvents, acids, and alkalis. Low-extractable polypropylene keeps sample purity intact through the filtration pass and maintains a low-dead-volume internal flow path. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.

    Membrane Characteristics

    • Node-fibril microstructure resists compaction under sustained operating pressure
    • Hydrofluoric acid resistance holds even in fully acid-digested samples
    • Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
    • Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
    • Membrane integrity holds across repeated autoclave sterilization cycles at 121°C to 134°C

    Housing Characteristics

    • Rigid polypropylene body maintains its geometry through routine filtration pressure
    • Stable across the full aqueous pH range in routine sample work
    • The seal formed against the membrane blocks bypass at rated operating pressure
    • Burst pressure rating provides a wide safety margin above the rated maximum operating pressure

    Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work before it carries into further processing. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    1.0 bar (15 psi) [IPA]
    Connection Type
    Luer-Lok/ Luer Slip
    Diameter
    30mm
    Filtration Area
    7.07cm²
    Material
    Polytetrafluoroethylene (PTFE)
    Pack Count
    500
    Pore Size (µm)
    0.2
    Prefilter (Yes/No)
    No
    Sterility
    Nonsterile
    Volume Throughput (ml)
    Up to 150ml
    Wettability
    Hydrophobic
    • Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
    • Venting Vessels - Vents small laboratory flasks and bottles, acting as a protective barrier that keeps out contaminants while allowing airflow.
    • Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
    • Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
    • Gas Line Filter - Removes particulates from gas lines reliably, protecting analytical instrumentation from debris to ensure gas purity.
    • Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.