Whatman ReZist PTFE Syringe Filters, 0.45 µm, 30 mm, 100/Pk - 10463513
Whatman standardizes its manufacturing platform to the point that consistency and thorough lot-level records come as a default, exactly what analytical laboratory work demands. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PTFE stays chemically inert against aggressive solvents, strong acids, and alkalis in service and repels water while passing gases and solvents freely. The PP housing sustains full structural integrity during elevated-temperature filtration operations while resisting degradation from routine sample matrices and preserves sample chemistry across the flow path. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- High porosity minimizes hold-up volume for small sample volumes
- Hydrofluoric acid resistance holds even in fully acid-digested samples
- Absolute pore rating delivers reproducible retention across every protocol
- Biological inertness resists enzymatic attack from proteases and lipases
- Minimal moisture absorption pairs with a low tare mass
Housing Characteristics
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- Rigid polypropylene body maintains its geometry through routine filtration pressure
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request a quote on Whatman filtration products from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 0.6 bar (9 psi) [IPA]
- Connection Type
- Luer-Lok/ Luer Slip
- Diameter
- 13mm
- Filtration Area
- 1.33cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophobic
- Rotovap Pump Guard - Blocks solvent splash and foam carryover from a bumping flask, protecting oil-sealed vacuum pumps from contamination.
- Industrial Fluids - Filters oils and lubricants for analysis, handling viscous industrial fluids to monitor particulate levels for maintenance.
- Aerosol Separation - Separates aqueous aerosols from gas streams, supporting accurate environmental monitoring and air quality analysis work.
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Extreme pH Samples - Clarifies strong acids and bases safely, relying on robust chemical compatibility to handle extreme pH levels reliably.