Whatman ReZist PTFE Syringe Filters, 5 µm, 30 mm, 100/Pk - 10463533
Whatman standardizes its manufacturing platform to the point that consistency and thorough lot-level records come as a default, exactly what analytical laboratory work demands. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. PTFE suits solvent and reagent filtration where other membranes fail while staying chemically inert against solvents, acids, and alkalis in service and excludes particles larger than the declared micron limit. The polypropylene housing holds its seal true run after run while staying inert across common laboratory solvents and delivers a chemically clean filtrate to the downstream step. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Low non-specific protein binding preserves recovery of biomolecules and therapeutic proteins during filtration
- Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
- UL 94 V-0 rating confirms the highest self-extinguishing classification
- Hydrofluoric acid resistance holds even in fully acid-digested samples
- Absolute pore rating delivers reproducible retention across every protocol
Housing Characteristics
- Resists stress cracking from aqueous salt and buffer solutions
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Impact-tolerant polypropylene body withstands routine bench handling without damage
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work before it carries into further processing. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/ Luer Slip
- Diameter
- 30mm
- Filtration Area
- 7.07cm²
- Material
- Polytetrafluoroethylene (PTFE)
- Pack Count
- 100
- Pore Size (µm)
- 5
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Volume Throughput (ml)
- Up to 150ml
- Wettability
- Hydrophobic
- Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Rotovap Pump Guard - Blocks solvent splash and foam carryover from a bumping flask, protecting oil-sealed vacuum pumps from contamination.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.