Chat with us, powered by LiveChat

Secure Checkout
ReZist Syringe Filter, 30mm, PTFE, 5.0um, 500/Pk

Thumbnail Filmstrip of ReZist Syringe Filter, 30mm, PTFE, 5.0um, 500/Pk Images

    Purchase ReZist Syringe Filter, 30mm, PTFE, 5.0um, 500/Pk

    ReZist Syringe Filter, 30mm, PTFE, 5.0um, 500/Pk
    Whatman SKU: 10463535

    $1,714.95
    Ships in 4 business days
     

    Whatman ReZist PTFE Syringe Filters, 5 µm, 30 mm, 500/Pk - 10463535

    Whatman verifies performance ratings at the lot level using process controls that stay uniform across its entire filtration lineup. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. The PTFE membrane withstands aggressive organics that degrade other media and suits solvent filtration where other membranes fail. The PP housing stays inert across common laboratory solvents and buffers in routine use and holds its seal true run after run. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.

    Membrane Characteristics

    • Non-wetting pore surface blocks liquid water while passing water vapor freely
    • Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
    • Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
    • Low extractables keep the chromatographic background clean
    • Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane

    Housing Characteristics

    • Rigid polypropylene body maintains its geometry through routine filtration pressure
    • Optimized internal geometry minimizes backpressure in service
    • Plasticizer-free polyolefin construction keeps the fluid path clean
    • Withstands standard 121°C steam autoclave cycles without softening or structural distortion

    A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Connection Type
    Luer-Lok/ Luer Slip
    Diameter
    30mm
    Filtration Area
    7.07cm²
    Material
    Polytetrafluoroethylene (PTFE)
    Pack Count
    500
    Pore Size (µm)
    5
    Prefilter (Yes/No)
    No
    Sterility
    Nonsterile
    Volume Throughput (ml)
    Up to 150ml
    Wettability
    Hydrophobic
    • Solvent Filtration - Filters aggressive solvents like THF and DMSO using PTFE chemistry for superior resistance and clean sample purity.
    • Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
    • Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
    • Spirits Congener Analysis - Clarifies distilled spirits samples ahead of GC analysis, protecting columns from residue during congener profiling.
    • Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
    • Venting Vessels - Vents small laboratory flasks and bottles, acting as a protective barrier that keeps out contaminants while allowing airflow.