SPARTAN HPLC Syringe Filter w/ Mini-Tip Outlet, 13mm, RC, 0.2um, 100/Pk
Whatman SKU: 10463040

Whatman SPARTAN Regenerated Cellulose (RC) Syringe Filters, 0.2 µm, 13 mm, 100/Pk - 10463040

Whatman applies over a century of filtration media expertise, manufacturing under the quality standards that established its products as global laboratory references. Syringe filters give the analyst a single-use device for clarifying samples right at the bench. The RC membrane protects columns with sub-micron particulate clarification while drawing samples through without pre-wetting and preserves dilute analytes and proteins in the filtrate. The polypropylene housing contributes minimal extractables to the filtrate while preventing sample bypass under rated operating pressure and routes flow to minimize backpressure in service. When chromatographic methods demand particle-free injections, point-of-use syringe filtration clarifies the sample before it reaches the column.

Technical Specifications

• Naturally hydrophilic surface wets without pre-wetting in aqueous and solvent samples
• Fine sub-micron particulate removal protects columns and instruments
• Absolute pore size rating gives consistent results across protocols
• Low non-specific binding preserves dilute analytes for maximum recovery
• Low extractables give a clean chromatographic background

Housing Specifications

• Tough polypropylene body tolerates repeated handling at the bench
• Medical-grade polypropylene with broad chemical compatibility
• Low extractable contribution protects sensitive downstream analyses
• Stable across the full aqueous pH range in routine sample work

Sample clarification before injection is the cheapest insurance your chromatography system has. Upstream sample clarification keeps your separations clean and reproducible across your HPLC and UHPLC methods. Request a quality certificate, lot documentation, or a blanket-order quote from the Tisch Scientific support team.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

4.4 bar (64 psi)

Burst Pressure (psi)

100psi

Connection Type

Luer-Lok/ Luer Slip

Construction

Polypropylene

Diameter

13mm

Filtration Area

1.3cm²

Material

Regenerated Cellulose

Maximum Operating Pressure

100psi

Maximum Operating Temperature (°C)

60°C

Pack Count

100

Pore Size (µm)

0.2

Prefilter (Yes/No)

No

Sterility

Nonsterile

Volume Throughput (ml)

Up to 10ml

Wettability

Hydrophilic

• Analytical Sample Prep - Optimized to ensure data integrity by effectively filtering contaminants before instrumental analysis
• Environmental Monitoring - Ideal for filtering pollutants in water and wastewater analysis to ensure regulatory compliance
• Quality Control Testing - Optimized for delivering reproducible results by filtering contaminants in standard pharmaceutical protocols
• Biological Fluid Analysis - Protects sensitive downstream instruments from filtering contaminants that can cause system failure
• General Laboratory Filtration - Increases workflow efficiency by optimizing sample clarity without sacrificing flow rates
• Sample Clarification - Optimizing sample clarity via rapid filtering of contaminants to maintain high throughput in busy laboratories