SPARTAN HPLC Syringe Filter w/ Mini-Tip Outlet, 13mm, RC, 0.2um, 500 Pk
Whatman SKU: 10463042

Whatman SPARTAN Regenerated Cellulose (RC) Syringe Filters, 0.2 µm, 13 mm, 500/Pk - 10463042

Whatman applies the same process controls across its filtration portfolio, verifying rated performance at the production lot level. A syringe filter seats a membrane in a sealed housing that threads onto a standard luer fitting. Regenerated cellulose keeps non-specific binding low to maximize analyte recovery while protecting columns with sub-micron clarification and handles acetonitrile, methanol, acetone, and DMSO. Polypropylene construction holds extractable contribution low for sensitive analyses while resisting degradation from routine sample matrices and prevents sample bypass under rated operating pressure. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.

Technical Specifications

• Fine sub-micron particulate removal protects columns and instruments
• Stable across the aqueous pH 3 to 12 range
• Absolute pore size rating gives consistent results across protocols
• Naturally hydrophilic surface wets without pre-wetting in aqueous and solvent samples
• Low non-specific binding preserves dilute analytes for maximum recovery

Housing Specifications

• Optimized internal geometry minimizes backpressure in service
• Reliable housing-to-membrane seal prevents bypass at rated pressure
• Tough polypropylene body tolerates repeated handling at the bench
• Resists stress cracking from aqueous salt and buffer solutions

Filtering particulates upstream protects the column investment your methods depend on. Upstream buffer clarification keeps avoidable particulates out of your flow path across routine and validated analytical methods. Start a live chat with our customer support technicians for quick answers to your compatibility, sizing, and sterility questions.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

4.4 bar (64 psi)

Burst Pressure (psi)

100psi

Connection Type

Luer-Lok/ Luer Slip

Construction

Polypropylene

Diameter

13mm

Filtration Area

1.3cm²

Material

Regenerated Cellulose

Maximum Operating Pressure

100psi

Maximum Operating Temperature (°C)

60°C

Pack Count

500

Pore Size (µm)

0.2

Prefilter (Yes/No)

No

Sterility

Nonsterile

Volume Throughput (ml)

Up to 10ml

Wettability

Hydrophilic

• Analytical Sample Prep - Optimized to ensure data integrity by effectively filtering contaminants before instrumental analysis
• Biological Fluid Analysis - Protects sensitive downstream instruments from filtering contaminants that can cause system failure
• Research & Development - Supports protocols that need to filter contaminants, providing the ability to optimize sample clarity
• Environmental Monitoring - Ideal for filtering pollutants in water and wastewater analysis to ensure regulatory compliance
• Sample Clarification - Optimizing sample clarity via rapid filtering of contaminants to maintain high throughput in busy laboratories
• General Laboratory Filtration - Increases workflow efficiency by optimizing sample clarity without sacrificing flow rates