SPARTAN HPLC Syringe Filter, 30mm, RC, 0.2um, 500 Pk
Whatman SKU: 10463062

Whatman SPARTAN Regenerated Cellulose (RC) Syringe Filters, 0.2 µm, 30 mm, 500/Pk - 10463062

Whatman applies over a century of filtration media expertise, manufacturing under the quality standards that established its products as global laboratory references. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. The RC membrane protects columns with sub-micron particulate clarification and keeps non-specific binding low for high analyte recovery. The PP housing prevents sample bypass under rated operating pressure while sustaining efficient flow on viscous samples and holds extractables low for sensitive analyses. Where analytical results depend on clean samples, syringe filtration removes particulates at the moment of preparation.

Technical Specifications

• Stable against DMSO and compatible with common aqueous and organic HPLC solvents
• Fine sub-micron particulate removal protects columns and instruments
• Low non-specific binding preserves dilute analytes for maximum recovery
• Naturally hydrophilic surface wets without pre-wetting in aqueous and solvent samples
• Stable across the aqueous pH 3 to 12 range

Housing Specifications

• Low extractable contribution protects sensitive downstream analyses
• Resists aqueous acids, bases, and alcohols in routine sample prep
• Optimized internal geometry minimizes backpressure in service
• Thermal-bonded construction keeps adhesives out of the fluid path

Reproducible separations start with samples that reach the column free of particulates. Upstream sample clarification keeps your separations clean and reproducible from sample preparation through final injection. Reach out to the Tisch Scientific team for application support, volume pricing, and technical assistance with your filtration product selection.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

4.4 bar (64 psi)

Burst Pressure (psi)

100psi

Connection Type

Luer-Lok/ Luer Slip

Construction

Polypropylene

Diameter

30mm

Filtration Area

5.7cm²

Material

Regenerated Cellulose

Maximum Operating Pressure

100psi

Maximum Operating Temperature (°C)

60°C

Pack Count

500

Pore Size (µm)

0.2

Prefilter (Yes/No)

No

Sterility

Nonsterile

Volume Throughput (ml)

Up to 150ml

Wettability

Hydrophilic

• General Laboratory Filtration - Increases workflow efficiency by optimizing sample clarity without sacrificing flow rates
• Analytical Sample Prep - Optimized to ensure data integrity by effectively filtering contaminants before instrumental analysis
• Particulate Removal - Designed for filtering contaminants, this filter aids in optimizing sample clarity across diverse sample types
• Quality Control Testing - Optimized for delivering reproducible results by filtering contaminants in standard pharmaceutical protocols
• Environmental Monitoring - Ideal for filtering pollutants in water and wastewater analysis to ensure regulatory compliance
• Biological Fluid Analysis - Protects sensitive downstream instruments from filtering contaminants that can cause system failure