Tisch Scientific Glass Fiber (GF) Syringe Filters, 0.45 µm, 25 mm, 100/Pk - SF18296
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. Glass fiber stays biologically inert across a broad range of chemistries and captures particulates throughout its depth. Low-extractable polypropylene keeps sample purity intact through the filtration pass while holding its seal true run after run and sustains efficient flow on viscous samples. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Prefiltration
- Media graded from coarse to fine across the stack
- Two-stage construction with the prefilter ahead of the final membrane
- Nominal depth rating sized for coarse particulate capture
- Layered glass fiber and polypropylene depth media
Membrane Characteristics
- Randomly oriented fiber network creates multiple particle interception paths
- High dirt-loading capacity extends filterable sample volume on turbid, particle-laden samples
- High internal surface area supports broad particle interception throughout fiber depth
- Inorganic construction suits demanding sample-preparation chemistries
- Resists adsorptive interaction with most common laboratory solvents and reagents
Housing Characteristics
- The seal formed against the membrane blocks bypass at rated operating pressure
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Medical-grade polypropylene with broad chemical compatibility
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Holdup Volume
- 400µl
- Material
- Glass Fiber (GF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 250-290µm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF+PP+GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.70
- Wettability
- Hydrophilic
- Water Analysis - Delivers high retention efficiency for suspended solids in water quality testing, ensuring accurate environmental reporting.
- Pre-filtration - Acts as a robust depth filter that protects downstream membranes, significantly extending final filtration service life.
- Sediment Porewater Prep - Glass fiber removes mineral and organic fines from sediment porewater samples ahead of ion and metals analysis.
- Environmental Prep - Clarifies wastewater and soil analysis extracts efficiently, preventing premature clogging of finer analytical membranes.
- Feed and Forage Analysis - Glass fiber removes undissolved feed matrix particles ahead of nutrient extraction and proximate composition analysis.
- Protein Aggregate Removal - Glass fiber removes large protein aggregates and precipitates from crude lysate ahead of activity assays and separation.