Chat with us, powered by LiveChat

Secure Checkout
GF Syringe Filters w/ 3 Pre-Filters, 1.6um, 25mm, Nonsterile, 100/Pk

Thumbnail Filmstrip of GF Syringe Filters w/ 3 Pre-Filters, 1.6um, 25mm, Nonsterile, 100/Pk Images

    Purchase GF Syringe Filters w/ 3 Pre-Filters, 1.6um, 25mm, Nonsterile, 100/Pk

    GF Syringe Filters w/ 3 Pre-Filters, 1.6um, 25mm, Nonsterile, 100/Pk
    Tisch SKU: SF18300

    $223.99
    2 in stock. Additional units ship in 4 weeks.
     

    Tisch Scientific Glass Fiber (GF) Syringe Filters, 1.6 µm, 25 mm, 100/Pk - SF18300

    Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. Glass fiber sustains high dirt-loading capacity through depth filtration while resisting chemical attack across diverse solvents and accepts water-based samples on contact. The polypropylene housing holds its seal true run after run while routing flow to minimize backpressure in service and stays inert across common laboratory solvents. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.

    Prefiltration

    • High dirt-holding capacity for the heaviest particulate loads
    • Depth media that capture particulate through their full thickness
    • Media graded from coarse to fine across the stack
    • Layered glass fiber and polypropylene depth media

    Membrane Characteristics

    • Inorganic fiber composition resists biodegradation during extended holding or room-temperature storage
    • Depth-filtration mechanism captures particles throughout the fiber matrix, not at the surface
    • Glass fiber resists thermal shock from rapid temperature changes in sample preparation
    • Fiber matrix sustains throughput as particulate load builds within the filter depth
    • Nominal pore ratings available from below one micron to coarse prefilter grades

    Housing Characteristics

    • Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
    • Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
    • Inert polyolefin wall contributes minimal sample adsorption to the filtrate
    • Plasticizer-free polyolefin construction keeps the fluid path clean

    A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request blanket-order pricing and paperwork support for your routine filtration purchases.

    Sterilization Guidance

    Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Connection Type
    Luer-Lok/Luer Slip
    Construction
    Polypropylene (PP)
    Diameter
    25mm
    Filtration Area
    4.08cm²
    Holdup Volume
    400µl
    Material
    Glass Fiber (GF)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    250-290µm
    Pack Count
    100
    Pore Size (µm)
    1.6
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    GF+PP+GF
    Sterility
    Nonsterile
    Sterilization
    Autoclave 121°C for 30min/ gamma 25kGy
    Volume Throughput (ml)
    50ml
    Weight
    0.70
    Wettability
    Hydrophilic
    • Bioanalytical Prep - Clears precipitated plasma and serum proteins ahead of LC-MS/MS assay, protecting columns and autosampler needles.
    • Soil Pesticide Analysis - Glass fiber removes soil matrix particles from agricultural extracts ahead of GC-MS and LC-MS pesticide residue testing.
    • Urine Sample Prep - Glass fiber removes urinary sediment and mucus from urine samples ahead of HPLC and immunoassay clinical testing.
    • Industrial Polymer Prep - Glass fiber removes polymer particulates and precipitates from solvent solutions ahead of GPC and rheology analysis.
    • Water Analysis - Delivers high retention efficiency for suspended solids in water quality testing, ensuring accurate environmental reporting.
    • Dissolution Testing - Clarifies pharmaceutical dissolution media of excipient particulates, protecting HPLC and UV assay systems from column fouling.