Tisch Scientific Glass Fiber (GF) Syringe Filters, 2.7 µm, 25 mm, 100/Pk - SF18301
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. The borosilicate glass matrix resists chemical attack across diverse solvents while wetting rapidly with aqueous samples and captures particulates throughout its depth. Polyolefin construction sheds virtually no extractable material into the sample while sustaining efficient flow on viscous samples and stays inert across common laboratory solvents. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Prefiltration
- Nominal depth rating sized for coarse particulate capture
- Layered glass fiber and polypropylene depth media
- High dirt-holding capacity for the heaviest particulate loads
- Media graded from coarse to fine across the stack
Membrane Characteristics
- Biologically inert borosilicate fiber with broad chemical compatibility
- Inorganic construction suits demanding sample-preparation chemistries
- High dirt-loading capacity extends filterable sample volume on turbid, particle-laden samples
- Fiber matrix sustains throughput as particulate load builds within the filter depth
- Low-ash borosilicate fiber keeps inorganic contamination minimal in analytical filtrates
Housing Characteristics
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Resists stress cracking from aqueous salt and buffer solutions
Juggling several filter types for one routine clarification eats up your bench time. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Holdup Volume
- 400µl
- Material
- Glass Fiber (GF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 250-290µm
- Pack Count
- 100
- Pore Size (µm)
- 2.7
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- GF+PP+GF
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.70
- Wettability
- Hydrophilic
- Protein Aggregate Removal - Glass fiber removes large protein aggregates and precipitates from crude lysate ahead of activity assays and separation.
- TOC Sample Filtration - Glass fiber prefilters aqueous samples ahead of total organic carbon analysis, removing particles without adding carbon.
- Viscous Fluids - Supports rapid processing of suspension cultures and lysates that quickly foul standard membrane filters alone.
- High Load Prep - Delivers exceptional dirt-loading capacity for filtering difficult, particulate-laden samples without early clogging today.
- Bioanalytical Prep - Clears precipitated plasma and serum proteins ahead of LC-MS/MS assay, protecting columns and autosampler needles.
- Soil Pesticide Analysis - Glass fiber removes soil matrix particles from agricultural extracts ahead of GC-MS and LC-MS pesticide residue testing.