GF Syringe Filters, 1.0um, 33mm, Double Luer Lock, Nonsterile, 100/Pk
Tisch SKU: SF18311

Tisch Scientific Glass Fiber (GF) Syringe Filters, 1 µm, 33 mm, 100/Pk - SF18311

Tisch Scientific welcomes bulk and blanket orders with volume discounts. Syringe filters give the analyst a single-use device for clarifying samples right at the bench. The glass microfiber matrix accepts water-based samples on contact while holding structural integrity through conditioning and resists chemical attack across diverse solvents. The MBS housing holds a reliable seal against the membrane edge while holding up to aqueous samples and buffers in routine prep and takes hand pressure without cracking. When chromatographic methods demand particle-free injections, point-of-use syringe filtration clarifies the sample before it reaches the column.

Technical Specifications

• Inorganic construction suits demanding sample-preparation chemistries
• Biologically inert borosilicate fiber with broad chemical compatibility
• Withstands high-temperature pre-conditioning up to 500°C
• Naturally hydrophilic surface wets rapidly with aqueous samples
• Nominal depth retention with high dirt-loading capacity

Housing Specifications

• Hard methacrylate surface resists scuffing through repeated handling
• Transparent body lets the operator confirm full sample recovery
• Housing-to-membrane seal keeps the sample from bypassing the membrane
• Creep-resistant matrix holds seal geometry through the filtration run

Clarify your routine aqueous samples in a single pass and cut down on juggling multiple filter types at the bench. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Reach out to the Tisch Scientific team for application support, volume pricing, and technical assistance with your filtration product selection.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Connection Type

Double Luer Lock

Construction

Methacrylate Butadiene Styrene (MBS)

Diameter

33mm

Filtration Area

5cm²

Flow Rate

350mL

Holdup Volume

200µl

Material

Glass Fiber (GF)

Maximum Operating Pressure

87psi

Maximum Operating Temperature (°C)

60°C

Membrane Thickness (µm)

250-290µm

Pack Count

100

Pore Size (µm)

1.0

Prefilter (Yes/No)

No

Sterility

Nonsterile

Sterilization

Autoclave 121°C for 30min/ gamma 25kGy

Volume Throughput (ml)

110mL

Weight

0.96

Wettability

Hydrophilic

• Quality Control Testing - Delivers reproducible results by removing high particulate loads in standard pharmaceutical protocols
• HPLC Sample Preparation - Preventing premature clogging by effectively removing high particulate loads during critical sample preparation steps
• General Laboratory Filtration - Increases workflow efficiency by preventing premature clogging without sacrificing flow rates
• Environmental Monitoring - Ideal for removing high particulate loads in water and wastewater analysis to ensure regulatory compliance
• Sample Clarification - Preventing premature clogging via rapid removal of high particulate loads to maintain high throughput in busy laboratories
• Dissolution Testing - Preventing premature clogging by consistently removing high particulate loads in compliance with standard testing monographs