Tisch Scientific Glass Fiber (GF) Syringe Filters, 0.45 µm, 17 mm, 100/Pk - SF17979
Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. The glass microfiber matrix accepts water-based samples on contact while resisting chemical attack across diverse solvents and delivers nominal retention as a depth medium. The polypropylene housing holds its seal true run after run while resisting degradation from routine sample matrices and maintains a low-dead-volume internal flow path. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Inorganic matrix withstands repeated aqueous exposures without swelling or structural change
- Resists adsorptive interaction with most common laboratory solvents and reagents
- Reduces bioburden and particulate load ahead of sterilizing-grade filtration
- Randomly oriented fiber network creates multiple particle interception paths
- Nominal pore ratings available from below one micron to coarse prefilter grades
Housing Characteristics
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
- Thermal-bonded construction keeps adhesives out of the fluid path
- Impact-tolerant polypropylene body withstands routine bench handling without damage
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 17mm
- Filtration Area
- 1.65cm²
- Holdup Volume
- 20µl
- Material
- Glass Fiber (GF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 250-290µm
- Pack Count
- 100
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 20ml
- Weight
- 0.33
- Wettability
- Hydrophilic
- Crude Oil Prep - Glass fiber removes wax and asphaltene particulates from crude oil samples ahead of elemental and composition analysis.
- Heavy Metal Digests - Glass fiber removes undissolved particulates from acid-digested soil and water samples ahead of ICP and AAS analysis.
- Dissolution Testing - Clarifies pharmaceutical dissolution media of excipient particulates, protecting HPLC and UV assay systems from column fouling.
- Viscous Fluids - Supports rapid processing of suspension cultures and lysates that quickly foul standard membrane filters alone.
- Industrial Polymer Prep - Glass fiber removes polymer particulates and precipitates from solvent solutions ahead of GPC and rheology analysis.
- Environmental Prep - Clarifies wastewater and soil analysis extracts efficiently, preventing premature clogging of finer analytical membranes.