Tisch Scientific Glass Fiber (GF) Syringe Filters, 5 µm, 25 mm, 100/Pk - SF18134
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Glass fiber stays biologically inert across a broad range of chemistries and captures particulates throughout its depth. The polypropylene housing holds its seal true run after run and sustains efficient flow on viscous samples. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Extends filterable sample volume three to seven times versus unprotected media
- Resists adsorptive interaction with most common laboratory solvents and reagents
- Low-ash borosilicate fiber keeps inorganic contamination minimal in analytical filtrates
- Inert glass surface preserves sample pH and ionic strength throughout filtration
- Biologically inert borosilicate fiber with broad chemical compatibility
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- Translucent housing wall allows visual confirmation of sample flow during filtration
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Holdup Volume
- 100µl
- Material
- Glass Fiber (GF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 250-290µm
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- QuEChERS Extract Prep - Clarifies lipid-laden produce extracts ahead of GC-MS pesticide residue analysis, preventing analytical column fouling.
- Milk and Dairy Analysis - Glass fiber prefiltration removes casein and fat globules from dairy samples ahead of HPLC and ion chromatography.
- Crude Oil Prep - Glass fiber removes wax and asphaltene particulates from crude oil samples ahead of elemental and composition analysis.
- Industrial Polymer Prep - Glass fiber removes polymer particulates and precipitates from solvent solutions ahead of GPC and rheology analysis.
- Wastewater Effluent Prep - Glass fiber removes suspended solids from industrial effluent ahead of COD, BOD, and nutrient compliance analysis.
- Environmental Prep - Clarifies wastewater and soil analysis extracts efficiently, preventing premature clogging of finer analytical membranes.