Tisch Scientific Glass Fiber (GF) Syringe Filters, 10 µm, 25 mm, 100/Pk - SF18135
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. Glass fiber stays biologically inert across a broad range of chemistries and sustains high dirt-loading capacity through depth filtration. Low-extractable polypropylene keeps sample purity intact through the filtration pass while sustaining efficient flow on viscous samples and presses snugly against the membrane during the pass. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.
Membrane Characteristics
- Low-ash borosilicate fiber keeps inorganic contamination minimal in analytical filtrates
- Surface silanol groups attract water molecules for immediate aqueous wetting
- Randomly oriented fiber network creates multiple particle interception paths
- Inert glass surface preserves sample pH and ionic strength throughout filtration
- Compatible with common biological buffers including phosphate, Tris, HEPES, and borate
Housing Characteristics
- The seal formed against the membrane blocks bypass at rated operating pressure
- Thermal-bonded construction keeps adhesives out of the fluid path
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Resists stress cracking from aqueous salt and buffer solutions
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Holdup Volume
- 100µl
- Incompatibility
- Benzyl alcohol, some esters, organic oxides
- Material
- Glass Fiber (GF)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 250-290µm
- Pack Count
- 100
- Pore Size (µm)
- 10.0
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclave 121°C for 30min/ gamma 25kGy
- Volume Throughput (ml)
- 50ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- QuEChERS Extract Prep - Clarifies lipid-laden produce extracts ahead of GC-MS pesticide residue analysis, preventing analytical column fouling.
- Environmental Prep - Clarifies wastewater and soil analysis extracts efficiently, preventing premature clogging of finer analytical membranes.
- Air Sampling Extract Prep - Glass fiber removes insoluble particulates from air filter extracts ahead of metals and organic compound analysis.
- Crude Oil Prep - Glass fiber removes wax and asphaltene particulates from crude oil samples ahead of elemental and composition analysis.
- Water Analysis - Delivers high retention efficiency for suspended solids in water quality testing, ensuring accurate environmental reporting.
- Tissue Culture - Clarifies tissue homogenates and cell lysates with ease, protecting finer downstream membranes from early blockage.