Glass Fiber Filter Paper - Grade D, 142mm, 10/pk - EF19047
Tisch Scientific rewards laboratories with special pricing when they commit to standing or high-quantity purchasing arrangements. Binder-free glass fiber construction survives high-temperature ignition in a muffle furnace, unlike cellulose paper, which chars away during the same step. Glass fiber holds its shape through wet handling and drying cycles while retaining particulates at 2.7 microns with very fast flow and survives muffle-furnace ignition, unlike cellulose paper. When a heavy particulate load would blind a fine filter mid-run, Grade D captures the coarse fraction first and the run finishes on schedule.
Filter Paper Characteristics
- High solids loading capacity for turbid, particle-dense environmental matrices
- Runs 1.8 times the sheet depth of Grade A for extended prefiltration service
- Handles concentrated hydrochloric and sulfuric acid solutions without degradation or dissolution
- Inorganic glass composition, distinct from combustible cellulose paper
- Heavier 120 to 143 gram per square meter basis weight
- Binder-free borosilicate glass survives muffle-furnace ignition with negligible mass change
A particulate-heavy sample can blind a low-capacity filter before you move the volume your method needs. The particulate you separate out is ready for the step your method runs next whether that step weighs the residue, analyzes it, or sends the protected sample on to a finer filter. Request blanket-order pricing for your routine laboratory orders from the Tisch Scientific team.
- Capacity
- 7mL
- Diameter
- 142mm
- Folded/ Fluted/ Pleated
- No
- Grade
- D
- Material
- Glass Fiber (GF)
- Nominal Basis Weight (g/ m²)
- 121g/m²
- Pack Count
- 10
- Particle Retention
- 2.7um
- Pore Size (µm)
- 2.7
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophobic
- Graded Prefiltration Stack - Runs upstream of a finer glass fiber grade or membrane to spread particulate load across two filtration stages.
- High-Temperature Ashing - Binder-free glass fiber paper withstands muffle-furnace temperatures for volatile-solids and loss-on-ignition steps.
- Loss-on-Ignition Analysis - Binder-free glass fiber survives muffle-furnace ignition, unlike cellulose paper, which chars away in the same step.
- Solvent Extract Cleanup - Glass fiber removes fine particulates from solvent extracts ahead of HPLC injection and chromatographic analysis.
- Membrane Prefilter Layer - Coarse glass fiber catches bulk particulate ahead of 0.22 or 0.45 micron membranes, extending analytical filter life.
- Staged Sample Clarification - Grade D clarifies heavily loaded samples ahead of finer glass fiber grades in stacked filtration setups.