Glass Fiber Filter Paper - Grade F, 25mm, 100/pk - EF19070
Whenever a question or quote request comes in, Tisch Scientific's team responds with friendly, patient service. Environmental monitoring and industrial QC labs reach for borosilicate glass microfiber when a sample carries variable particulate load. Glass fiber paper uses an inorganic borosilicate matrix, not cellulose fiber and holds its shape through wet handling and drying cycles. Where a TCLP extract demands a defined, EPA-specified filter, the leaching procedure stays in regulatory compliance with the same borosilicate grade EPA used to develop Method 1311.
Filter Paper Characteristics
- Inorganic glass composition, distinct from combustible cellulose paper
- Medium flow rate balances retention and throughput for routine glass fiber filtration
- Basis weight between 53 and 85 grams per square meter
- Keeps its dimensions from wet handling through drying
- Nominal thickness between 350 and 450 micrometers
- Borosilicate glass matrix contributes negligible extractable ions or organics to aqueous filtrates
A filter that loses its form under a heavy particulate load can fail you partway through the run. One glass fiber grade series covers the particulate work on your bench from heavy-load prefiltration through fine particle capture. Not sure which product fits your order? Request a quote and current stock from the Tisch Scientific team.
- Capacity
- 7mL
- Diameter
- 25mm
- Folded/ Fluted/ Pleated
- No
- Grade
- F
- Material
- Glass Fiber (GF)
- Nominal Basis Weight (g/ m²)
- 75g/m²
- Pack Count
- 100
- Particle Retention
- 0.7um
- Pore Size (µm)
- 0.7
- Sterility
- Nonsterile
- Weight
- 0.12
- Wettability
- Hydrophobic
- Solvent Extract Cleanup - Glass fiber removes fine particulates from solvent extracts ahead of HPLC injection and chromatographic analysis.
- Loss-on-Ignition Analysis - Binder-free glass fiber survives muffle-furnace ignition, unlike cellulose paper, which chars away in the same step.
- Solvent-Compatible Filtration - Aqueous, alcohol, and hydrocarbon samples share one glass microfiber grade across mixed-solvent workflows.
- Gravimetric TSS Testing - Binder-free glass fiber withstands the full weigh-dry-weigh cycle without adding measurable mass to the TSS result.
- High-Temperature Ashing - Binder-free glass fiber paper withstands muffle-furnace temperatures for volatile-solids and loss-on-ignition steps.
- TCLP Method 1311 Prep - Grade F borosilicate glass fiber is the EPA-selected paper for developing the TCLP leaching procedure.