Glass Fiber Filter Paper - Grade F, 47mm, 100/pk - EF19071
Tisch Scientific prices its filtration lineup to ease the strain on laboratories running lean procurement budgets. Borosilicate glass fiber filter paper supports total-suspended-solids testing and other gravimetric methods across water and wastewater analysis. Glass fiber paper anchors total-suspended-solids testing across water and wastewater labs while retaining particulates across a defined micron-rated grade series and uses an inorganic borosilicate matrix, not cellulose fiber. Where a TCLP extract demands a defined, EPA-specified filter, the leaching procedure stays in regulatory compliance with the same borosilicate grade EPA used to develop Method 1311.
Filter Paper Characteristics
- Delivers 0.7 micron nominal retention
- Inorganic glass composition, distinct from combustible cellulose paper
- Keeps its dimensions from wet handling through drying
- Hot filtration compatible for gelatinous or viscous sample matrices
- Binder-free borosilicate glass survives muffle-furnace ignition with negligible mass change
- High solids loading capacity for turbid, particle-dense environmental matrices
Everything after the filter, from the number you report to the finer filter you protect downstream, rests on a clean and complete particulate separation. One glass fiber grade series covers the particulate work on your bench from heavy-load prefiltration through fine particle capture. Request blanket-order pricing for your routine laboratory orders from the Tisch Scientific team.
- Capacity
- 7mL
- Diameter
- 47mm
- Folded/ Fluted/ Pleated
- No
- Grade
- F
- Material
- Glass Fiber (GF)
- Nominal Basis Weight (g/ m²)
- 75g/m²
- Pack Count
- 100
- Particle Retention
- 0.7um
- Pore Size (µm)
- 0.7
- Sterility
- Nonsterile
- Weight
- 0.23
- Wettability
- Hydrophobic
- TCLP Method 1311 Prep - Grade F borosilicate glass fiber is the EPA-selected paper for developing the TCLP leaching procedure.
- Sheet-Depth Capture - The microfiber sheet distributes captured particulate through its full depth instead of collecting it on one face.
- Solvent Extract Cleanup - Glass fiber removes fine particulates from solvent extracts ahead of HPLC injection and chromatographic analysis.
- Solvent-Compatible Filtration - Aqueous, alcohol, and hydrocarbon samples share one glass microfiber grade across mixed-solvent workflows.
- High-Temperature Ashing - Binder-free glass fiber paper withstands muffle-furnace temperatures for volatile-solids and loss-on-ignition steps.
- Trace Element Blanks - Borosilicate glass minimizes contamination of filtrates in ICP-MS and ICP-OES trace-metal analysis of environmental samples.