Nylon Syringe Filter, Nonsterile, 0.22µm, 17mm, Hydrophilic Polyamide, HPLC/GC, 100/Pk
LabExact SKU: LE-IWT-ES10300

LabExact Nylon Syringe Filters, 0.22 µm, 17 mm, 100/Pk - LE-IWT-ES10300

A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. Nylon ships in bulk non-sterile packaging for routine clarification and sample prep while resisting particle shedding across the run and stays stable across pH 3 to 12. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use while maintaining a low-dead-volume internal flow path and sheds virtually no extractable material into the sample. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.

Membrane Characteristics

• Absolute pore size rating holds consistent across every protocol
• Common ketone solvents, including acetone, methyl ethyl ketone, and methyl isobutyl ketone, cause no attack
• Moisture-plasticized amide linkages raise membrane impact toughness over dry resin
• Synthetic polyamide backbone resists microbial and enzymatic degradation unlike cellulose membranes
• Ester- and alcohol-resistant across common laboratory sample preparations

Housing Characteristics

• Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
• Plasticizer-free polyolefin construction keeps the fluid path clean
• Thermal-bonded construction keeps adhesives out of the fluid path
• Standardized luer connection geometry provides secure engagement with standard syringe tips

Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.

Sterilization Guidance

Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Diameter

17mm

Material

Nylon

Pack Count

100

Pore Size (µm)

0.22

Sterility

Nonsterile

Weight

0.168

Wettability

Hydrophilic

• Cosmetics Batch Testing - Filters aqueous lotions, serums, and personal care products for particulate QC and potency assay sampling.
• QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.
• Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
• IC Column Protection - Clarifies aqueous samples ahead of anion and cation analysis, guarding ion-exchange columns against particulate fouling.
• Ink and Dye Filtration - Filters aqueous and solvent-based inks and dyes, removing pigment agglomerates ahead of color strength analysis.
• Chemical Analysis - Withstands aggressive bases and alcohols, ideal for tough chemical compatibility filtration challenges in routine analysis.