Nylon Syringe Filters, 0.22um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 500/Pk
GVS SKU: FJ25BNPNY002AD01

GVS ABLUO Nylon Syringe Filters, 0.22 µm, 25 mm, 500/Pk - FJ25BNPNY002AD01

Every GVS syringe filter passes an integrity test confirming proper fit and weld, verification that the assembly is sealed against filter bypass. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The nylon membrane holds dimensional stability under rated backpressure while holding sterile-rated retention across the envelope and accepts water-based samples without surfactant conditioning. The PP housing sustains efficient flow on viscous samples while resisting degradation from routine sample matrices and leaves no seam for sample to bypass the membrane. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.

Membrane Characteristics

• Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
• Solvent compatibility extends to both acetonitrile and methanol
• Compatible with most HPLC mobile phases for sample clarification
• Moisture-plasticized amide linkages raise membrane impact toughness over dry resin
• Absolute pore size rating holds consistent across every protocol

Housing Characteristics

• Withstands standard 121°C steam autoclave cycles without softening or structural distortion
• Translucent housing wall allows visual confirmation of sample flow during filtration
• Standardized luer connection geometry provides secure engagement with standard syringe tips
• Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening

A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Color

Transparent

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene Housing

Diameter

25mm

Filtration Area

4.63 cm²

Inlet Connection

Female Luer Lock

Material

Nylon

Maximum Operating Pressure

75 psi

Maximum Operating Temperature (°C)

90

Outlet Connection

Male Luer Slip

Pack Count

500

Pore Size (µm)

0.22

Sterility

Nonsterile

Wettability

Hydrophilic

• UHPLC Sample Prep - Removes sub-micron debris from aqueous samples before injection, protecting narrow-bore UHPLC columns from accelerated wear.
• Forensic Toxicology Screening - Clarifies urine and blood extracts ahead of LC-MS or GC-MS analysis in forensic drug-screening laboratories.
• HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
• QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.
• HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.
• IC Column Protection - Clarifies aqueous samples ahead of anion and cation analysis, guarding ion-exchange columns against particulate fouling.