Tisch Scientific Nylon Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SF13829
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. Naturally hydrophilic nylon accepts water-based samples without surfactant preconditioning while resisting alkaline buffer systems and ships in economical bulk non-sterile packaging. The polypropylene housing presses snugly against the membrane during the pass and stays inert across common laboratory solvents. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- Low extractable contribution to sensitive analytical preparations
- Ester- and alcohol-resistant across common laboratory sample preparations
- Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
- DMSO compatibility extends across sample-preparation chemistries
- Polar amide backbone gives high native affinity for nucleic acids
Housing Characteristics
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Plasticizer-free polyolefin construction keeps the fluid path clean
Particulates in your buffers and mobile phases shorten column life and unsettle your baselines. Upstream buffer clarification keeps your run from stalling on particulates that slipped through before they reach the column inlet or detector. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.
Sterilization Guidance
The housing supports customer autoclave sterilization at 121°C for 30 minutes.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 35.0psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 10.0ml
- Holdup Volume
- 100ul
- Incompatibility
- Acids, agressive organics, protein
- Material
- Nylon
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 90-120µm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121° C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 100ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- Solvent Filtering - Supports clarification of ester-based and alcohol solvents with precision during routine laboratory sample processing.
- Environmental Extract Prep - Clarifies water and soil extracts ahead of trace metals or pesticide-residue analysis for accurate results.
- Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.