Nylon Syringe Filters, 3.0um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk
Tisch SKU: SF14902

Tisch Scientific Nylon Syringe Filters, 3 µm, 25 mm, 100/Pk - SF14902

Tisch Scientific welcomes bulk and blanket orders with volume discounts. A syringe filter seats a membrane in a sealed housing that threads onto a standard luer fitting. Nylon arrives in economical bulk packaging for high-volume routine filtration and wets on contact with aqueous samples. Polypropylene construction resists chemical degradation from routine sample matrices while keeping the fluid path low in extractable contamination and prevents sample bypass under rated operating pressure. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.

Technical Specifications

• Non-sterile for routine clarification and sample prep
• Absolute pore size rating provides consistent results across filtration protocols
• High tensile strength for stability under elevated differential pressures
• Broad compatibility with alcohols, aliphatic, and aromatic solvents
• Naturally hydrophilic surface wets without pre-wetting in aqueous applications

Housing Specifications

• Optimized internal geometry minimizes backpressure in service
• Thermal-bonded construction keeps adhesives out of the fluid path
• Resists aqueous acids, bases, and alcohols in routine sample prep
• Medical-grade polypropylene with broad chemical compatibility

A clean particulate separation keeps your aqueous sample preparation dependable. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Send your application details to our technical service team and request a filtration product recommendation.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

5.5psi

Burst Pressure (psi)

87psi

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene (PP)

Diameter

25mm

Filtration Area

4.08cm²

Flow Rate

240.0ml

Holdup Volume

100ul

Incompatibility

Acids, agressive organics, protein

Material

Nylon

Maximum Operating Pressure

87psi

Maximum Operating Temperature (°C)

60°C

Membrane Thickness (µm)

90-120µm

Pack Count

100

Pore Size (µm)

3.0

Prefilter (Yes/No)

Yes

Prefilter Material

PP

Sterility

Nonsterile

Sterilization

Autoclave: 121° C for 30 minutes/ Gamma: 5kg, for 8 hours

Volume Throughput (ml)

100ml

Weight

0.52

Wettability

Hydrophilic

• Prefiltration for Fine Filters - Removes coarse particulates to extend the operational life of downstream 0.22µm and 0.45µm membrane filters
• Dissolution Media Clarification - Removes undissolved excipients from dissolution samples to ensure accurate downstream analytical measurement
• Environmental Sample Processing - Clarifies sediment-rich water samples to prevent clogging during subsequent fine filtration or testing steps
• Particle Size Fractionation - Separates particulates above 3.0µm from the solution to enable precise particle size distribution analysis
• HPLC Column Protection - Removes large contaminants from mobile phases and injection samples to protect HPLC columns and instruments
• Industrial QC Testing - Processes manufacturing samples with visible particulates to ensure consistent quality control in workflows