Tisch Scientific Nylon Syringe Filters, 3 µm, 25 mm, 100/Pk - SF14903
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. The nylon membrane resists alkaline conditions across a broad buffer range while withstanding elevated differential pressures and ships in sealed sterile packaging for cleanroom workflows. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane and delivers a chemically clean filtrate to the downstream step. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
- Polar amide backbone gives high native affinity for nucleic acids
- Hydrophilic surface takes up aqueous samples with no pre-wetting
- Solvent compatibility extends to both acetonitrile and methanol
- Alkaline-resistant across a broad range of aqueous buffers
Housing Characteristics
- Withstands ethylene oxide gas sterilization without embrittlement or structural damage
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Thermal-bonded construction keeps adhesives out of the fluid path
- PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 5.5psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 240.0ml
- Holdup Volume
- 100ul
- Incompatibility
- Acids, agressive organics, protein
- Material
- Nylon
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 90-120µm
- Pack Count
- 100
- Pore Size (µm)
- 3.0
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 100ml
- Weight
- 0.88
- Wettability
- Hydrophilic
- Veterinary Drug Residue Testing - Clarifies meat, milk, and egg extracts ahead of LC-MS/MS screening for drug residues in food-safety laboratories.
- Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.
- Ink and Dye Filtration - Filters aqueous and solvent-based inks and dyes, removing pigment agglomerates ahead of color strength analysis.
- Dissolution Testing - Supports accurate drug release profiles by clarifying dissolution samples ahead of HPLC quantitation in QC labs.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.