Tisch Scientific Nylon Syringe Filters, 5 µm, 25 mm, 100/Pk - SF15156
Tisch Scientific's sales team brings fast, courteous service to every filtration order, from first quote through fulfillment. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Nylon ships in bulk non-sterile packaging for routine clarification and sample prep and withstands elevated differential pressures. Low-extractable polypropylene keeps sample purity intact through the filtration pass and holds its seal true run after run. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Saturation moisture uptake reaches up to 8% by resin weight
- Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
- Ester- and alcohol-resistant across common laboratory sample preparations
- DMSO compatibility extends across sample-preparation chemistries
- Alkaline-resistant across a broad range of aqueous buffers
Housing Characteristics
- Polypropylene housing withstands rated backpressure from dense sample matrices without deformation
- Thermal-bonded construction keeps adhesives out of the fluid path
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 4.5psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.08cm²
- Flow Rate
- 300.0ml
- Holdup Volume
- 100ul
- Incompatibility
- Acids, agressive organics, protein
- Material
- Nylon
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 90-120µm
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121° C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 100ml
- Weight
- 0.52
- Wettability
- Hydrophilic
- IC Column Protection - Clarifies aqueous samples ahead of anion and cation analysis, guarding ion-exchange columns against particulate fouling.
- Biofuel Particulate Testing - Removes particulate debris from biodiesel and fuel samples ahead of chromatographic QC analysis in fuel testing labs.
- Cosmetics Batch Testing - Filters aqueous lotions, serums, and personal care products for particulate QC and potency assay sampling.
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.