Tisch Scientific Nylon Syringe Filters, 5 µm, 13 mm, 100/Pk - SF18005
Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. The nylon matrix resists particle shedding through extended filtration cycles while holding consistent retention across mixed-phase samples and resists alkaline buffer systems. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane and sustains efficient flow on viscous samples. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.
Membrane Characteristics
- Common ketone solvents, including acetone, methyl ethyl ketone, and methyl isobutyl ketone, cause no attack
- Compatible with most HPLC mobile phases for sample clarification
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
- Alkaline-resistant across a broad range of aqueous buffers
- Synthetic polyamide backbone resists microbial and enzymatic degradation unlike cellulose membranes
Housing Characteristics
- Medical-grade polypropylene with broad chemical compatibility
- Thermal-bonded construction keeps adhesives out of the fluid path
- Housing rated for reliable filtration under syringe-applied backpressure at its maximum operating pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 23.0psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 6.0ml
- Holdup Volume
- 20ul
- Incompatibility
- Acids, agressive organics, protein
- Material
- Nylon
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 90-120µm
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Nonsterile
- Sterilization
- Autoclave: 121° C for 30 minutes/ Gamma: 5kg, for 8 hours
- Volume Throughput (ml)
- 10ml
- Weight
- 0.19
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.
- Beverage QC Clarification - Clarifies wine, beer, and juice samples ahead of analytical and microbiological testing in quality control labs.
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
- Dissolution Testing - Supports accurate drug release profiles by clarifying dissolution samples ahead of HPLC quantitation in QC labs.
- Cannabis Potency Testing - Clarifies cannabinoid extracts in ethanol or hydrocarbon solvents ahead of HPLC potency and pesticide-residue analysis.