Tisch Scientific Nylon Syringe Filters, 0.22 µm, 4 mm, 100/Pk - SF18212
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. Nylon arrives factory sterile for immediate single-use workflows while withstanding elevated differential pressures and wicks moisture into the disc on contact. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane and sustains efficient flow on viscous samples. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Absolute pore size rating holds consistent across every protocol
- Common ketone solvents, including acetone, methyl ethyl ketone, and methyl isobutyl ketone, cause no attack
- Low extractable contribution to sensitive analytical preparations
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
- Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Sterile barrier packaging assures the housing's factory-sterilized state is intact at the point of use
A column clogging mid-run from unfiltered sample can cost you the rest of your analytical day. Upstream sample clarification keeps your separations clean and reproducible so your filtrate reaches the column clean. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 23.0psi
- Burst Pressure (psi)
- 87psi
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 17mm
- Filtration Area
- 1.65cm²
- Flow Rate
- 10.0ml
- Holdup Volume
- 20ul
- Incompatibility
- Acids, agressive organics, protein
- Material
- Nylon
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 90-120µm
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 20ml
- Weight
- 0.33
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- Forensic Toxicology Screening - Clarifies urine and blood extracts ahead of LC-MS or GC-MS analysis in forensic drug-screening laboratories.
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
- Biofuel Particulate Testing - Removes particulate debris from biodiesel and fuel samples ahead of chromatographic QC analysis in fuel testing labs.
- QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.
- HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.