Nylon Syringe Filters, 1.0um, 13mm, Luer-Lok/Luer Slip, Sterile, 100/Pk
Tisch SKU: SF18266

Tisch Scientific Nylon Syringe Filters, 1 µm, 13 mm, 100/Pk - SF18266

Tisch Scientific customer service specialists focus on laboratory products and can help source the right solution for specific applications. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. Nylon wets on contact with aqueous samples through its hydrophilic surface while withstanding elevated differential pressures and tolerates alcohols and aliphatic and aromatic solvents. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use and keeps the fluid path low in extractable contamination. For routine sample preparation across many methods, the syringe filter folds clarification into one disposable step.

Technical Specifications

• Documented sterility assurance for regulated aseptic workflows
• High tensile strength for stability under elevated differential pressures
• Broad compatibility with alcohols, aliphatic, and aromatic solvents
• Naturally hydrophilic surface wets without pre-wetting in aqueous applications
• Low extractable contribution to sensitive analytical preparations

Housing Specifications

• Rigid polypropylene body holds its shape under manual filtration pressure
• Inert polyolefin wall contributes minimal sample adsorption to the filtrate
• Reliable housing-to-membrane seal prevents bypass at rated pressure
• Optimized internal geometry minimizes backpressure in service

Filtering buffers, reagents, and aqueous samples keeps your preparation moving and consistent. Consistent aqueous clarification keeps your sample preparation moving from the first sample of the day through the last. Ask our friendly customer service team to confirm the pore size, membrane, and sterility options your filtration application calls for.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Bubble Point (psi)

8.5psi

Burst Pressure (psi)

87psi

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene (PP)

Diameter

13mm

Filtration Area

1.09cm²

Flow Rate

25.0ml

Holdup Volume

20ul

Material

Nylon

Maximum Operating Pressure

87psi

Maximum Operating Temperature (°C)

60°C

Membrane Thickness (µm)

90-120µm

Pack Count

100

Pore Size (µm)

1.0

Prefilter (Yes/No)

Yes

Prefilter Material

PP

Sterility

Sterile

Volume Throughput (ml)

10ml

Weight

0.40

Wettability

Hydrophilic

• General Sample Clarification - Removes coarse particulates from limited-volume samples using a pre-sterilized unit to ensure analytical purity
• HPLC Sample Preparation - Removes large contaminants from limited-volume mobile phases to protect analytical columns from premature fouling
• Buffer Solution Clarification - Clarifies pH-neutral laboratory buffers by removing visible particulates to ensure consistent analytical baselines
• Environmental Water Analysis - Clarifies sediment-rich water samples to prevent clogging during subsequent fine filtration or analytical testing
• Pharmaceutical QC Analysis - Prepares drug solutions for content uniformity testing using a sterile filter to prevent background contamination
• Method Development Support - Enables prefiltration testing with minimal sample consumption, ideal for early-stage protocol optimization studies