Tisch Scientific Nylon Syringe Filters, 0.22 µm, 25 mm, 100/Pk - SPEC17984
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The nylon membrane draws aqueous buffers without pre-wetting and stays stable across pH 3 to 12. Low-extractable polypropylene keeps sample purity intact through the filtration pass while holding its seal true run after run and stands firm against aqueous acids, bases, and alcohols during regular handling. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Common ketone solvents, including acetone, methyl ethyl ketone, and methyl isobutyl ketone, cause no attack
- DMSO compatibility extends across sample-preparation chemistries
- Autoclaving at 121°C for 30 minutes leaves pore structure intact
- Polar amide backbone gives high native affinity for nucleic acids
- Non-sterile format suits HPLC and GC sample clarification
Housing Characteristics
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Double luer-lock connections on inlet and outlet deliver a secure, leak-resistant in-line path for continuous filtration
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Impact-tolerant polypropylene body withstands routine bench handling without damage
Unfiltered particulates shift your retention times and peak shapes from run to run. Upstream sample clarification keeps your separations clean and reproducible so your filtrate reaches the column clean. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 4.9cm²
- Material
- Nylon
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.58
- Wettability
- Hydrophilic
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.
- HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.
- Solvent Filtering - Supports clarification of ester-based and alcohol solvents with precision during routine laboratory sample processing.
- UHPLC Sample Prep - Removes sub-micron debris from aqueous samples before injection, protecting narrow-bore UHPLC columns from accelerated wear.
- Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
- Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.