Chat with us, powered by LiveChat

Secure Checkout
Nylon Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk

Thumbnail Filmstrip of Nylon Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk Images

    Purchase Nylon Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk

    Nylon Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100/Pk
    Tisch SKU: SPEC18119

    $121.99
    In Stock
     

    Tisch Scientific Nylon Syringe Filters, 3 µm, 25 mm, 100/Pk - SPEC18119

    Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The nylon membrane draws aqueous buffers without pre-wetting and tolerates alcohols and aliphatic and aromatic solvents. Low-extractable polypropylene keeps sample purity intact through the filtration pass while leaving no seam for sample to bypass the membrane and routes flow to minimize backpressure in service. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.

    Membrane Characteristics

    • Filtration clarifies HPLC mobile phase buffers of particulates
    • Resonance-stabilized amide bonds anchor nylon's resistance to alkaline hydrolysis
    • Solvent compatibility extends to both acetonitrile and methanol
    • Synthetic polyamide backbone resists microbial and enzymatic degradation unlike cellulose membranes
    • Non-sterile format suits HPLC and GC sample clarification

    Housing Characteristics

    • Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
    • Minimal extractable release from the housing supports sensitive analytical work downstream
    • Optimized internal geometry minimizes backpressure in service
    • Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping

    A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.

    Sterilization Guidance

    The housing supports customer autoclave sterilization at 121°C for 30 minutes.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    4.35psi
    Burst Pressure (psi)
    116psi
    Connection Type
    Double Luer Lock
    Construction
    Polypropylene (PP)
    Diameter
    25mm
    Filtration Area
    4.9cm²
    Material
    Nylon
    Maximum Operating Pressure
    72.5psi
    Maximum Operating Temperature (°C)
    80℃
    Pack Count
    100
    Pore Size (µm)
    3.0
    Sterility
    Nonsterile
    Weight
    0.58
    Wettability
    Hydrophilic
    • Chemical Analysis - Withstands aggressive bases and alcohols, ideal for tough chemical compatibility filtration challenges in routine analysis.
    • Environmental Extract Prep - Clarifies water and soil extracts ahead of trace metals or pesticide-residue analysis for accurate results.
    • Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
    • Beverage QC Clarification - Clarifies wine, beer, and juice samples ahead of analytical and microbiological testing in quality control labs.
    • Biofuel Particulate Testing - Removes particulate debris from biodiesel and fuel samples ahead of chromatographic QC analysis in fuel testing labs.
    • Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.