Tisch Scientific Nylon Syringe Filters, 0.22 µm, 20 mm, 100/Pk - SPEC18126
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The nylon membrane comes in a non-sterile format for routine analytical preparation while wetting on contact with aqueous buffers and tolerates alcohols and aliphatic and aromatic solvents. A tough ABS body absorbs the force of manual filtration while keeping a tight edge seal against the membrane and holds up to aqueous samples and buffers. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Membrane Characteristics
- Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
- Solvent compatibility extends to both acetonitrile and methanol
- Ester- and alcohol-resistant across common laboratory sample preparations
- Tortuous, reticulated pore structure yields more usable filtration area than capillary-pore membranes
- Absolute pore size rating holds consistent across every protocol
Housing Characteristics
- Low extractable content from the ABS housing keeps filtrate analytical cleanliness high
- Withstands saline and seawater sample matrices up to 60°C
- The butadiene component of the terpolymer provides toughness and impact resistance
- Opaque body shields light-sensitive samples during the pass
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request details on payment terms or standing-order arrangements for your routine filtration purchases.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 2.9psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Filtration Area
- 3.1cm²
- Material
- Nylon
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Weight
- 0.60
- Wettability
- Hydrophilic
- UHPLC Sample Prep - Removes sub-micron debris from aqueous samples before injection, protecting narrow-bore UHPLC columns from accelerated wear.
- Buffer Filtration - Delivers high mechanical strength for efficient clarification of alkaline buffers and aqueous reagents in the lab.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.
- Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
- Amino Acid Profiling - Clarifies aqueous sample digests for HPLC and LC-MS amino acid analysis in food, nutrition, and fermentation monitoring.
- HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.