Tisch Scientific Nylon Syringe Filters, 0.22 µm, 20 mm, 100/Pk - SPEC18131
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. The nylon membrane delivers bacterial retention at the rated pore size while resisting alkaline buffer systems and ships in sealed sterile packaging for cleanroom workflows. A tough ABS body absorbs the force of manual filtration while holding up to aqueous samples and buffers in routine prep and maintains housing integrity through the run. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Low extractable contribution to sensitive analytical preparations
- Saturation moisture uptake reaches up to 8% by resin weight
- DMSO compatibility extends across sample-preparation chemistries
- Moisture-plasticized amide linkages raise membrane impact toughness over dry resin
- Filtration clarifies HPLC mobile phase buffers of particulates
Housing Characteristics
- Tough ABS housing withstands repeated handling at the bench
- Housing-to-membrane seal keeps the sample from bypassing the membrane
- Housing integrity maintained at warm sample temperatures up to 80°C
- Aliphatic hydrocarbon compatibility extends to heptane and hexane during sample prep
Particulates in your buffers and mobile phases shorten column life and unsettle your baselines. Reliable particulate removal protects your instruments and your data so column life and baseline stability stay predictable. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 40.6psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Filtration Area
- 3.1cm²
- Material
- Nylon
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 0.22
- Sterility
- Sterile
- Weight
- 0.72
- Wettability
- Hydrophilic
- Beverage QC Clarification - Clarifies wine, beer, and juice samples ahead of analytical and microbiological testing in quality control labs.
- Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.
- Biofuel Particulate Testing - Removes particulate debris from biodiesel and fuel samples ahead of chromatographic QC analysis in fuel testing labs.
- Dissolution Testing - Supports accurate drug release profiles by clarifying dissolution samples ahead of HPLC quantitation in QC labs.
- UHPLC Sample Prep - Removes sub-micron debris from aqueous samples before injection, protecting narrow-bore UHPLC columns from accelerated wear.