Pall Acrodisc PTFE Syringe Filters, 0.45 µm, 13 mm, 1000/Pk - 2403
Decades spent on fluid management inform how Pall approaches laboratory-scale filtration challenges today. Syringe filters replace the separate holder and vacuum apparatus of bulk filtration with a single disposable unit, eliminating cleaning between samples. Chemically inert PTFE resists attack from the harshest process chemistries while suiting solvent filtration where other membranes fail and excludes particles larger than the declared micron limit. The PP housing sustains efficient flow on viscous samples while preserving sample chemistry across the flow path and resists degradation from routine sample matrices. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Strong oxidizing agents like nascent chlorine and concentrated sodium hydroxide cause no attack
- Membrane integrity holds across repeated autoclave sterilization cycles at 121°C to 134°C
- Chemical resistance spans the full pH 1 to 14 range
- Aqueous buffers and HPLC mobile phases wet the hydrophilic surface instantly
- Low extractables keep the chromatographic background clean
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Minispike inlet penetrates rubber vial septa to enable closed, contamination-free transfer from sealed source containers
- Stable across the full aqueous pH range in routine sample work
- Optimized internal geometry minimizes backpressure in service
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 9psi (IPA)
- Connection Type
- Luer-Lock/ Minispike
- Construction
- Polypropylene (PP)
- Diameter
- 13mm
- Filtration Area
- 1.0cm²
- Holdup Volume
- < 30 µL
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 100psi
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophobic
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Automated Sample Prep - PTFE's chemical inertness holds up through repeated robotic filtration cycles without degrading or swelling over time.
- Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Sample Protection - Low-binding properties ensure maximum recovery of low-concentration analytes, improving accuracy in quantitative assay results.