Pall Acrodisc Versapor Syringe Filters, 1.2 µm, 25 mm, 50/Pk - 4190
A syringe filter membrane can clog fast on viscous, difficult samples: exactly the failure mode Pall's Versapor acrylic copolymer chemistry was built to push past. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. The Versapor matrix sustains throughput on challenging viscous samples while holding retention absolute at its pore rating and becomes fully wetted on first contact with the sample. The polypropylene housing preserves sample chemistry across the flow path while sustaining efficient flow on viscous samples and resists degradation from routine sample matrices. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Nonwoven nylon 6,6 backing adds dimensional stability under vacuum and positive pressure
- Viscous, difficult-to-filter solutions pass through without excessive clogging
- Single acrylic copolymer chemistry covers pore ratings from 0.2 to 5.0 micron
- Naturally hydrophilic membrane wets instantly with no pre-wetting needed
- Consistent, absolute pore ratings keep protocol-to-protocol results reliable
Housing Characteristics
- Optimized internal geometry minimizes backpressure in service
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Medical-grade polypropylene with broad chemical compatibility
- The seal formed against the membrane blocks bypass at rated operating pressure
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request stock availability on Pall fit, size, and sterility options from the Tisch Scientific team.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 6psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 660ml
- Holdup Volume
- < 100 µL
- Material
- Acrylic Copolymer
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 50
- Pore Size (µm)
- 1.2
- Sterility
- Sterile
- Wettability
- Hydrophilic
- Molecular Biology Buffer Prep - Clarifies restriction enzyme buffers and nuclease solutions for efficient and reproducible enzymatic performance.
- Antibody Solution Prep - Clarifies monoclonal and polyclonal antibody preparations in aqueous buffer ahead of ELISA and bioassay incubation.
- Drinking Water Quality Testing - Delivers rapid high-flow filtration of potable water samples for dissolved ion and chemical contaminant analysis.
- Cosmetics Safety Testing - Clarifies aqueous cosmetic and skincare formulations for heavy metal, preservative, and allergen content verification.
- Serum Media Clarification - Serves as a rugged pre-filter for nutrient-rich culture media, removing aggregates ahead of downstream filters.
- Chromatography Sample Prep - Removes particulates before HPLC and UHPLC injection, guarding column frits from clogging and backpressure.