Pall Acrodisc Supor (PES) Syringe Filters, 0.8/0.2 µm, 25 mm, 1000/Pk - 4504
Pall validates the Supor membrane's retention at each stated pore rating, keeping biological sample clarification consistent from one production lot to the next. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. PES stays stable across the full pH 1 to 14 range while needing a surface treatment before its polysulfone base wets and safeguards sterility by retaining bacteria at fine pore ratings. The PP housing sustains efficient flow on viscous samples and resists degradation from routine sample matrices. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.
Prefiltration
- Aqueous samples wet the surface instantly without a pre-wetting step
- Coarse polyethersulfone prefilter clarifies larger particulate upstream
- Hydrophilic polyethersulfone sustains high flow through aqueous samples
- Delayed membrane clogging extends usable throughput per device
Membrane Characteristics
- Absolute pore size rating holds consistent across every lot
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Chemical breadth spans alcohols, glycols, and aqueous buffers
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- The seal formed against the membrane blocks bypass at rated operating pressure
- Stable across the full aqueous pH range in routine sample work
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request a quality certificate, lot documentation, or a blanket-order quote for your filtration order at any time.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 51psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 175ml
- Holdup Volume
- < 100 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.8/0.2
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Cell Culture Media Sterilization - An asymmetric pore structure resists clogging when filtering protein-heavy broths for mammalian cell growth.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Robotic Tip Protection - Supor's low-particulate surface resists shedding, keeping narrow-bore robotic pipette tips clear of micro-clogs.