Pall Acrodisc Supor (PES) Syringe Filters, 0.45 µm, 25 mm, 1000/Pk - 4508
The Acrodisc housing's Supor membrane pairs an asymmetric pore gradient's flow rate benefit with ultra-low protein binding, both built into the same casting process. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. Supor's asymmetric membrane captures contaminants at the upstream surface while sustaining higher flow than standard PES at equal retention and stays stable across the pH 1 to 14 range. Polypropylene construction resists chemical degradation from routine sample matrices while keeping sample purity intact through the filtration pass and leaves no seam for sample to bypass the membrane. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
- High flow rate pairs with a low extractable background
- Ionic extractables from the membrane stay very low
- Aromatic sulfone backbone underlies stability across the full pH range
- Antibody and protein samples pass through PES with minimal adsorptive loss
Housing Characteristics
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Translucent housing wall allows visual confirmation of sample flow during filtration
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 33psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 300ml
- Holdup Volume
- < 100 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Pharmaceutical Quality Control - Meets regulated lab standards where housing integrity and low extractable profiles are strictly required daily.
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.