Pall Acrodisc Supor (PES) Syringe Filters, 0.2 µm, 37 mm, 20/Pk - 4525
Pall validates the Supor membrane's retention at each stated pore rating, keeping biological sample clarification consistent from one production lot to the next. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. The PES membrane loads aqueous buffers with zero pre-wetting delay while leaving proteins less surface area to contact and stays stable across the pH 1 to 14 range. The polypropylene housing preserves sample chemistry across the flow path while maintaining a low-dead-volume internal flow path and leaves no seam for sample to bypass the membrane. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Prefiltration
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
- Two-stage construction pairs a borosilicate glass fiber prefilter with the downstream membrane
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
Membrane Characteristics
- Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
- Ionic extractables from the membrane stay very low
- Absolute pore size rating holds consistent across every lot
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
Unfiltered particulates shift your retention times and peak shapes from run to run. Pre-injection filtration protects the resolution your methods depend on so your retention times and peak shapes stay consistent. Request Pall's validation documentation from the Tisch Scientific team ahead of a method transfer or audit.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 51psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 37mm
- Filtration Area
- 7.5cm²
- Material
- Polyethersulfone (PES)
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 20
- Pore Size (µm)
- 0.2
- Sterility
- Sterile
- Wettability
- Hydrophilic
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Pharmaceutical Quality Control - Meets regulated lab standards where housing integrity and low extractable profiles are strictly required daily.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Biopharmaceutical Filling - Provides a validated microbial barrier for final product filling where low protein binding supports maximum yield.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.