Pall Acrodisc Supor (PES) Syringe Filters, 0.2 µm, 25 mm, 200/Pk - 4583
Pall validates the Supor membrane's retention at each stated pore rating, keeping biological sample clarification consistent from one production lot to the next. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. Low-binding PES achieves sterile-grade retention with high recovery while needing a surface treatment before its polysulfone base wets and keeps that modified surface active throughout use. The PP housing stays inert across common laboratory solvents and buffers in routine use while maintaining a low-dead-volume internal flow path and preserves sample chemistry across the flow path. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Chemical breadth spans alcohols, glycols, and aqueous buffers
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Supor binds far less protein than standard PES
- Finest available pore ratings achieve aseptic-grade filtration performance
- PFAS extractables test non-detectable under EPA Method 537.1
Housing Characteristics
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Reach the Tisch Scientific team for a quote or stock check on your Pall filtration setup.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 51psi
- Burst Pressure (psi)
- 60psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 3.9cm²
- Flow Rate
- 175ml
- Holdup Volume
- < 100 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 100°C
- Pack Count
- 200
- Pore Size (µm)
- 0.2
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Sterile Buffer Preparation - Delivers the flow rates needed for rapid cold sterilization of large-volume laboratory reagents and salt solutions.
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
- Biopharmaceutical Filling - Provides a validated microbial barrier for final product filling where low protein binding supports maximum yield.