Pall Acrodisc Supor (PES) Syringe Filters, 0.8 µm, 25 mm, 50/Pk - 4618
Pall angled the Supor membrane's PES layers into an uneven pore gradient, an engineering choice that keeps flow rapid as biological filtration volumes climb. A syringe filter's small hold-up volume limits sample loss, a meaningful difference when working with a limited or precious sample. The PES matrix tolerates aliphatic alcohols, glycols, and aqueous buffers while loading aqueous buffers with zero pre-wetting delay and sustains higher flow than standard PES at equal retention. Polypropylene construction resists chemical degradation from routine sample matrices while sustaining efficient flow on viscous samples and sheds virtually no extractable material into the sample. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Mechanical strength keeps the matrix intact under vacuum or pressure
- Inherent hydrophilicity allows instant aqueous wetting with no pre-wetting step
- Ionic extractables from the membrane stay very low
- Non-ionic surface avoids charge-driven protein binding of positively and negatively charged membrane types
- Supor's dirt-holding capacity runs higher than standard PES
Housing Characteristics
- Inert polyolefin wall contributes minimal sample adsorption to the filtrate
- The seal formed against the membrane blocks bypass at rated operating pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
Juggling several filter types for one routine clarification eats up your bench time. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Reach the Tisch Scientific team for a quote or stock check on your Pall filtration setup.
Sterilization Guidance
Sterile single-use packaging removes any in-lab sterilization preparation step.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 13psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 600ml
- Holdup Volume
- < 300 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 50
- Pore Size (µm)
- 0.8
- Sterility
- Sterile
- Wettability
- Hydrophilic
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Biological Assays - Protects sensitive enzymatic and antibody-based assays from particulate interference without adsorbing critical reagents.
- PFAS Water Testing - PES filters process aqueous samples for EPA Method 1633A PFAS testing without added fluorinated background.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Dissolution Testing - PES's naturally low binding profile keeps dissolution-testing throughput high without extra filtration force.