Pall Acrodisc Supor (PES) Syringe Filters, 1.2 µm, 32 mm, 1000/Pk - 4661
Pall set out to pair robust flow performance with dependable protein retention when it developed the Supor membrane's layered pore profile. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Supor's graded pore structure sustains higher flow than standard PES while admitting aqueous reagents on contact, skipping any surfactant rinse and gives protein molecules fewer surface sites to adsorb. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use while keeping sample purity intact through the filtration pass and maintains a low-dead-volume internal flow path. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Mechanical strength keeps the matrix intact under vacuum or pressure
- PFAS extractables test non-detectable under EPA Method 537.1
- Compatibility spans both nucleic acid and protein-based filtration
- Supor binds far less protein than standard PES
- Ionic extractables from the membrane stay very low
Housing Characteristics
- Medical-grade polypropylene with broad chemical compatibility
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine the same way every time you run it. Request volume pricing and stock availability on your filtration product selection from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 32mm
- Filtration Area
- 5.8cm²
- Flow Rate
- 1700ml
- Holdup Volume
- < 100 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 1.2
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- UHPLC/HPLC Prep - Delivers low extractables to ensure noise-free baselines in sensitive chromatography applications and trace analysis.
- Dissolution Testing - PES's naturally low binding profile keeps dissolution-testing throughput high without extra filtration force.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.
- Robotic Tip Protection - Supor's low-particulate surface resists shedding, keeping narrow-bore robotic pipette tips clear of micro-clogs.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.