Pall Acrodisc Supor (PES) Syringe Filters, 0.2 µm, 13 mm, 1000/Pk - 4692
Pall validates the Supor membrane's retention at each stated pore rating, keeping biological sample clarification consistent from one production lot to the next. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. PES's open pore layout leaves proteins less surface to contact while needing a surface treatment before its polysulfone base wets and reaches sterile-grade performance while protecting analyte yield. Thermal-bonded PP construction leaves no seam for sample to bypass the membrane while keeping sample purity intact through the filtration pass and resists degradation from routine sample matrices. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- DNA and RNA pass through with negligible adsorptive loss
- Chemical breadth spans alcohols, glycols, and aqueous buffers
- Sterilizing-grade PES membrane lots are challenge-tested against Brevundimonas diminuta to qualify 0.2 micron retention
- Ionic extractables from the membrane stay very low
- Sulfone backbone's hydrolytic stability tolerates repeated autoclave steam sterilization cycles
Housing Characteristics
- Resists stress cracking from aqueous salt and buffer solutions
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Translucent housing wall allows visual confirmation of sample flow during filtration
- Rated operating pressure supports filtration of high-resistance and viscous samples without housing distortion
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request volume pricing on Pall membranes for your recurring method needs.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 51psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Minispike
- Construction
- Polypropylene (PP)
- Diameter
- 13mm
- Filtration Area
- 1.0cm²
- Flow Rate
- 35ml
- Holdup Volume
- < 30 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 100psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.2
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Sample Recovery - Minimizes sample loss in low-protein-binding applications, delivering high yield for precious or rare biological specimens.
- Sterile Buffer Preparation - Delivers the flow rates needed for rapid cold sterilization of large-volume laboratory reagents and salt solutions.
- Media Preparation - Facilitates rapid sterilization of tissue culture additives, lowering contamination risk during sensitive laboratory work.
- Pharmaceutical Quality Control - Meets regulated lab standards where housing integrity and low extractable profiles are strictly required daily.
- Robotic Tip Protection - Supor's low-particulate surface resists shedding, keeping narrow-bore robotic pipette tips clear of micro-clogs.
- Ophthalmic Drug Compounding - Ensures sterility of eye drop formulations while preserving active ingredient concentration through low binding.