Pall Acrodisc Posidyne Syringe Filters, 0.2 µm, 25 mm, 50/Pk - 4908-N
Pall designed the Posidyne membrane surface to carry a positive Zeta charge, so electrokinetic adsorption pulls particles carrying a negative charge out of solution and keeps them bound in place. A syringe-mounted, charge-modified nylon membrane combines size-based retention with electrostatic capture, extending performance beyond a standard unmodified membrane. The nylon matrix achieves sterile-rated retention across the operating envelope while resisting particle shedding across the run and captures endotoxin below pore rating without tighter-membrane pressure drop. Pre-sterilized polypropylene construction is individually wrapped for direct use in sterile workflows and delivers a chemically clean filtrate to the downstream step. Where particle-free samples must also clear sub-rated contaminants, samples leaving a charge-modified membrane are cleaner than a standard pore rating alone can deliver.
Membrane Characteristics
- DMSO compatibility extends across sample-preparation chemistries
- Synthetic polyamide backbone resists microbial and enzymatic degradation unlike cellulose membranes
- Solvent compatibility extends to both acetonitrile and methanol
- Moisture-plasticized amide linkages raise membrane impact toughness over dry resin
- Gamma-sterilized in sealed packaging for immediate aseptic use
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
Particulates in your buffers and mobile phases shorten column life and unsettle your baselines. Upstream buffer clarification keeps your run from stalling on particulates that slipped through before they reach the column inlet or detector. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 46psi
- Connection Type
- Luer-Lock/ Luer Slip
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 77ml
- Holdup Volume
- < 100 µL
- Material
- Positively Charged Nylon (Posidyne)
- Maximum Operating Pressure
- 80psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 50
- Pore Size (µm)
- 0.2
- Sterility
- Sterile
- Sterilization
- Autoclavable at 121°C for 15–20 min
- Wettability
- Hydrophilic
- Chemical Analysis - Withstands aggressive bases and alcohols, ideal for tough chemical compatibility filtration challenges in routine analysis.
- GC Sample Prep - Clarifies aqueous and organic extracts ahead of gas chromatography injection, protecting inlets from particulate fouling.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- Forensic Toxicology Screening - Clarifies urine and blood extracts ahead of LC-MS or GC-MS analysis in forensic drug-screening laboratories.
- Column Protection - Extends the life of analytical columns by reliably removing micro-particulates from aqueous mobile phases in HPLC.
- Genomic DNA Scavenging - Strips trace DNA contaminants from recombinant biologic feedstreams by leveraging the membrane's cationic surface charge.