Pall ValuPrep Nylon Syringe Filters, 0.45 µm, 13 mm, 1000/Pk - 6054541
Syringe filter production at Pall answers to the same quality infrastructure standing behind its process-scale filtration systems. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. The nylon matrix handles alcohols and aliphatic and aromatic solvents while holding dimensional stability under rated backpressure and delivers sharp particle cutoff at the rated pore size. The PP housing stays inert across common laboratory solvents and buffers in routine use and maintains a low-dead-volume internal flow path. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Absolute pore size rating holds consistent across every protocol
- Ester- and alcohol-resistant across common laboratory sample preparations
- Moisture-plasticized amide linkages raise membrane impact toughness over dry resin
- Filtration clarifies HPLC mobile phase buffers of particulates
- Polar amide backbone gives high native affinity for nucleic acids
Housing Characteristics
- Resists stress cracking from aqueous salt and buffer solutions
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Impact-tolerant polypropylene body withstands routine bench handling without damage
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Standardize your filtration purchases across every method with volume pricing and documentation from the Tisch Scientific team.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 29psi
- Connection Type
- Luer-Lock/ Luer Slip
- Diameter
- 13mm
- Filtration Area
- 1.33cm²
- Material
- Nylon
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Non-autoclavable
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- Buffer Filtration - Delivers high mechanical strength for efficient clarification of alkaline buffers and aqueous reagents in the lab.
- Amino Acid Profiling - Clarifies aqueous sample digests for HPLC and LC-MS amino acid analysis in food, nutrition, and fermentation monitoring.
- Dissolution Throughput - Increases throughput for high-volume dissolution workflows in pharmaceutical QC by reducing the force required to filter.
- Environmental Extract Prep - Clarifies water and soil extracts ahead of trace metals or pesticide-residue analysis for accurate results.
- QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.