Pall Acrodisc Versapor Syringe Filters, 10 µm, 25 mm, 1000/Pk - AP-4002
Sera, biological preparations, and viscous samples that stall on a standard membrane device pass through the Versapor membrane inside the syringe filter housing instead. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. Naturally hydrophilic Versapor wets on contact with aqueous samples while sustaining throughput on challenging viscous samples and minimizes analyte loss to the membrane surface. The polypropylene housing routes flow to minimize backpressure in service while pressing snugly against the membrane during the pass and delivers a chemically clean filtrate to the downstream step. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Stable hydrophilic character persists throughout the full depth of the acrylic matrix
- Hydrophilic acrylic surface resists protein adsorption through a stable water interface
- Rigid acrylic copolymer matrix resists deformation under filtration-grade differential pressures
- Nonwoven nylon 6,6 backing adds dimensional stability under vacuum and positive pressure
- Single acrylic copolymer chemistry covers pore ratings from 0.2 to 5.0 micron
Housing Characteristics
- The seal formed against the membrane blocks bypass at rated operating pressure
- Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Impact-tolerant polypropylene body withstands routine bench handling without damage
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine from the first sample of the day through the last. Request volume pricing on Pall membranes for your recurring method needs.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 60psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 2.8cm²
- Flow Rate
- 1182ml
- Holdup Volume
- < 125 µL
- Material
- Acrylic Copolymer
- Maximum Operating Pressure
- 60psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 10
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Compounding Pharmacy Use - Clarifies aqueous compounded ophthalmic, nasal, and oral solutions before final sterile or particulate quality testing.
- Molecular Biology Buffer Prep - Clarifies restriction enzyme buffers and nuclease solutions for efficient and reproducible enzymatic performance.
- Cosmetics Safety Testing - Clarifies aqueous cosmetic and skincare formulations for heavy metal, preservative, and allergen content verification.
- Dairy Testing - Screens milk and dairy product aqueous extracts for chemical contaminants, adulterants, and composition parameters.
- Small-Batch Aqueous Prep - Delivers rapid throughput for routine laboratory solutions where high dirt-loading capacity is needed to finish.
- Drinking Water Quality Testing - Delivers rapid high-flow filtration of potable water samples for dissolved ion and chemical contaminant analysis.