Pall Acrodisc PVDF Syringe Filters, 0.45 µm, 25 mm, 200/Pk - AP-4310
The Acrodisc housing platform pairs with Pall's own proprietary membrane media, built for demanding analytical and bioprocess workflows. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. PVDF holds consistent absolute retention at the rated pore size while tolerating common chromatography solvents without degradation and reverses PVDF's natural affinity for protein adsorption. The polypropylene housing presses snugly against the membrane during the pass while maintaining a low-dead-volume internal flow path and sheds virtually no extractable material into the sample. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Prefiltration
- Depth-loading glass fiber matrix captures particulate throughout its full thickness
- High dirt-holding capacity suits very turbid, high-solids sample loads
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
Membrane Characteristics
- Low extractables preserve a clean chromatographic baseline
- Organic solvent resistance beats PES or nylon at comparable pore size
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
- Resistance to hydrolytic degradation exceeds that of nylon membranes
- Mechanically durable membrane holds integrity under filtration pressure
Housing Characteristics
- Housing rated for warm-sample filtration above standard laboratory temperature without softening or seal loss
- The seal formed against the membrane blocks bypass at rated operating pressure
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Request a blanket-order quote to keep routine throughput volumes of Pall filters in stock.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 24psi
- Burst Pressure (psi)
- 60psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 3.9cm²
- Flow Rate
- 110ml
- Holdup Volume
- < 100 µL
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 82°C
- Pack Count
- 200
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophobic
- Immunochemistry Research - Delivers exceptional chemical resistance for mild organic mixtures used in sensitive immunochemical research applications.
- ELISA Biomarker Prep - Preserves low-abundance biomarkers during ELISA sample filtration, supporting accurate immunoassay quantitation.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- IC Guard Filtration - Removes particulates from aqueous samples before ion analysis, keeping detector cells free of fouling between injections.
- Biological Samples - Clarifies protein-rich solutions without loss of target molecules, preserving sample integrity for critical downstream assays.
- Trace Analysis - Prevents non-specific binding in trace analysis, keeping low-concentration analytes in solution for reliable detection.