Pall Acrodisc Supor (PES) Syringe Filters, 0.45 µm, 25 mm, 1000/Pk - AP-4426
Pall set out to pair robust flow performance with dependable protein retention when it developed the Supor membrane's layered pore profile. Sample preparation for chromatography often ends with a syringe filter on the path to the vial. The PES membrane clarifies particulates at the rated pore size while loading aqueous buffers with zero pre-wetting delay and pairs fast flow with reduced protein adsorption. Low-extractable polypropylene keeps sample purity intact through the filtration pass while staying inert across common laboratory solvents and routes flow to minimize backpressure in service. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Prefiltration
- High dirt-holding capacity suits very turbid, high-solids sample loads
- Naturally hydrophilic borosilicate fiber wets quickly with aqueous samples
- Glass fiber prefilter stage sustains flow through particle-laden, hard-to-filter samples
- Two-stage construction pairs a borosilicate glass fiber prefilter with the downstream membrane
Membrane Characteristics
- Compatibility spans both nucleic acid and protein-based filtration
- Aromatic sulfone backbone underlies stability across the full pH range
- Pore structure integrity holds through autoclave cycles up to 126°C
- The Supor membrane's graded structure keeps pressure drop low across a wide flow range
- Non-hydrogen-bonding surface avoids the polar adsorption nylon's amide backbone causes
Housing Characteristics
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Impact-tolerant polypropylene body withstands routine bench handling without damage
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Minimal extractable release from the housing supports sensitive analytical work downstream
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Request volume pricing on Pall membranes for your recurring method needs.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 33psi
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lock/ Luer Slip
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Filtration Area
- 3.9cm²
- Flow Rate
- 300ml
- Holdup Volume
- < 100 µL
- Material
- Polyethersulfone (PES)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 55°C
- Pack Count
- 1000
- Pore Size (µm)
- 0.45
- Sterility
- Nonsterile
- Sterilization
- Autoclavable at 121°C for 15-20 min
- Wettability
- Hydrophilic
- Serum Filtration - Clarifies serum and plasma samples quickly while retaining critical proteins needed for accurate downstream analytical testing.
- Urine Drug Screening - Clarifies protein-poor urine samples for dilute-and-shoot LC-MS/MS toxicology testing without adsorbing target drug analytes.
- Life Science Prep - Speeds processing of viscous biological solutions, improving laboratory workflow efficiency during busy sample prep days.
- Nucleic Acid Recovery - Processes DNA and RNA extracts with minimal nucleic acid adsorption, preserving yield on the hydrophilic PES surface.
- Organic Carbon Testing - Clarifies water samples ahead of DOC and UV254 analysis while keeping organic carbon adsorption to the membrane minimal.
- Pesticide Residue Testing - PES membranes improve polar pesticide recovery in food-safety LC-MS/MS testing versus hydrogen-bonding nylon.