Chat with us, powered by LiveChat

Secure Checkout
Acro Disc PSF Syringe Filters w/ Nylon Membrane - 0.2um, 25mm, 200/Pk

Thumbnail Filmstrip of Acro Disc PSF Syringe Filters w/ Nylon Membrane - 0.2um, 25mm, 200/Pk Images

    Purchase Acro Disc PSF Syringe Filters w/ Nylon Membrane - 0.2um, 25mm, 200/Pk

    Acro Disc PSF Syringe Filters w/ Nylon Membrane - 0.2um, 25mm, 200/Pk
    Pall SKU: AP-4436

    $785.95
    Ships in 6 weeks
     

    Pall Acrodisc Nylon Syringe Filters, 0.2 µm, 25 mm, 200/Pk - AP-4436

    The Acrodisc housing platform pairs with Pall's own proprietary membrane media, built for demanding analytical and bioprocess workflows. A sterilizing-grade syringe filter carries manufacturer bacterial retention testing built into the design, giving analysts documented sterile-grade performance without repeating that testing in-house for the format. Nylon stays stable across pH 3 to 12 and ships in economical bulk non-sterile packaging. The polypropylene housing routes flow to minimize backpressure in service while leaving no seam for sample to bypass the membrane and delivers a chemically clean filtrate to the downstream step. For workflows requiring validated sterile-grade performance, point-of-use retention meets it without a separate sterilization step.

    Membrane Characteristics

    • Absolute pore size rating holds consistent across every protocol
    • Alkaline-resistant across a broad range of aqueous buffers
    • Amorphous-crystalline nylon blend composition doubles membrane burst strength over homopolymer nylon
    • Low extractable contribution to sensitive analytical preparations
    • Filtration clarifies HPLC mobile phase buffers of particulates

    Housing Characteristics

    • Impact-tolerant polypropylene body withstands routine bench handling without damage
    • Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
    • Plasticizer-free polyolefin construction keeps the fluid path clean
    • Inert polyolefin wall contributes minimal sample adsorption to the filtrate

    Particulates that reach your column with the sample foul the frits and shorten its life. Pre-injection filtration protects the resolution your methods depend on by clearing particulates ahead of the column and frits. Reach the Tisch Scientific team for a quote or stock check on your Pall filtration setup.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    42psi
    Burst Pressure (psi)
    60psi
    Connection Type
    Luer-Lock/ Luer Slip
    Construction
    Polypropylene (PP)
    Diameter
    25mm
    Filtration Area
    3.9cm²
    Flow Rate
    75ml
    Holdup Volume
    < 100 µL
    Material
    Nylon
    Maximum Operating Pressure
    75psi
    Maximum Operating Temperature (°C)
    55°C
    Pack Count
    200
    Pore Size (µm)
    0.2
    Sterility
    Nonsterile
    Sterilization
    Non-autoclavable
    Wettability
    Hydrophilic
    • UHPLC Sample Prep - Removes sub-micron debris from aqueous samples before injection, protecting narrow-bore UHPLC columns from accelerated wear.
    • HPLC Sample Prep - Clarifies mixed aqueous and organic solvents to ensure stable baselines and protect chromatography columns from clogging.
    • QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.
    • Buffer Filtration - Delivers high mechanical strength for efficient clarification of alkaline buffers and aqueous reagents in the lab.
    • Mining Process Waters - Clarifies process water samples from hydrometallurgical operations, removing solids ahead of ICP-MS trace metal quantitation.
    • HPLC Pump Protection - Filters reservoir solvent to prevent particulates from abrading pump check valves and seals over time.